What does the removable battery requirement involve?
A removable battery must let the end user take it out of the product and replace it easily, at any point during the product’s life. This works with commercially available tools, without special or proprietary tools, heat or solvents. The requirement is set in Article 11 of Regulation (EU) 2023/1542 and applies only to complete batteries.
The regulation itself speaks of removing and replacing a battery. In practice this is called the removability requirement. It comes down to the same thing: the battery must come out without you destroying the product.
The product must come with instructions and safety information on using, removing and replacing the battery. That information must stay available online on a public website that end users can understand.
For batteries in light means of transport a lighter requirement applies. There, replacement by an independent professional is enough, including the individual cells in a battery pack.
Which products does the requirement apply to?
The requirement applies to anyone who places a product with a built-in portable battery on the EU market. That is the manufacturer or the importer of the appliance, not only the battery producer. A portable battery is a sealed battery of no more than five kilograms that is not designed for industrial use.
If you sell an appliance under your own brand that is made in Asia, you are usually the one placing it on the EU market. You are then the manufacturer and you must have the design adjusted, even if your supplier fits the battery.
Think of wireless earbuds, an electric toothbrush, a toy with a battery, a portable speaker or a household appliance with a built-in battery. In all those cases there is a portable battery inside that must be able to come out.
Which products fall outside Article 11?
Article 11 applies to products with a built-in portable battery. A product that is itself the battery therefore falls outside it. A power bank or a separate replacement battery does not have to be removable, because there is no appliance for the battery to come out of. The other requirements of the battery regulation still apply.
The difference lies in the question of what the product is. If the battery sits in an appliance with its own function, the requirement applies. If the battery is the product itself, as with a power bank, there is nothing to remove.
A starter battery also falls outside Article 11. That is a separate category in the regulation, not a portable battery. A wrong classification leads to the wrong requirements, so the first step is always to determine which type of battery is in your product.
If your product falls outside the removability requirement, the other requirements of Regulation (EU) 2023/1542 still apply in full. Think of the labelling, the QR code from 18 February 2027 and the safety requirements. Being outside the scope of Article 11 is not an exemption from the rest.
Not sure whether the requirement applies to your product?
Tell us briefly which product it concerns. We will get in touch with what we can do and what it costs.
Which exceptions apply and what changes in 2026?
Some products may be designed so that only an independent professional replaces the battery. Since 11 November 2026 that list has been expanded by Delegated Regulation (EU) 2026/1770. It now also covers certain wearables, electric toys until 31 July 2030, wireless food probes and ATEX equipment.
The regulation has two kinds of exceptions. Under the first the battery may be fixed, but an independent professional must be able to replace it (Article 11(2)). Under the second the requirement falls away entirely (Article 11(3)).
Paragraph 3 applies where a permanent connection is needed for safety. It also applies to products that mainly collect data, where the connection is needed for the integrity of that data.
The list under paragraph 2, as it reads since 11 November 2026, is below. Each entry comes with the condition under which the exception applies.
| Product | Condition | Source |
|---|---|---|
| Appliances, including wearables, for a wet environment that are washable or rinsable | Necessary for the safety of user and appliance | para 2(a) |
| Professional medical imaging, radiotherapy and in-vitro diagnostic devices | No additional condition | para 2(b) |
| Wearables too small to replace the battery safely or needing a sealed housing | Necessary for safety, durability or water resistance | para 2(c) |
| Electric toys with rechargeable batteries, until 31 July 2030 | Necessary for the safety of the toy during use | para 2(d) |
| Wireless thermometer probes that come into contact with food | Necessary for the safety of user and appliance | para 2(e) |
| Products for potentially explosive atmospheres (ATEX, Directive 2014/34/EU) | Necessary for the safety of user and appliance | para 2(f) |
| Body-worn systems for subcutaneous administration of medicines | Necessary for the safety of user and appliance | para 2(g) |
| Telematics equipment on the roof of agricultural and construction machinery | Necessary for the safety of user and appliance | para 2(h) |
The exceptions under a, c, d, e, f, g and h apply only where they are necessary for the safety of the user and the appliance. For professional medical equipment under b that condition does not apply.
The delegated regulation entered into force on 11 November 2026, twenty days after publication. The Article 11 requirement itself only applies from 18 February 2027. The list of exceptions is therefore fixed before the obligation begins.
From when does the removability requirement apply?
The removability requirement of Article 11 applies from 18 February 2027. That follows from Article 96 of Regulation (EU) 2023/1542. The expanded list of exceptions has applied since 11 November 2026, through Delegated Regulation (EU) 2026/1770. For electric toys a temporary exception runs until 31 July 2030.
The regulation has applied in the main since 18 February 2024. Article 11 was deliberately given a later date, so manufacturers had time to redesign their products. That time is now short: a product placed on the market after 18 February 2027 must meet the requirement.
| What | From | Source |
|---|---|---|
| List of exceptions expanded | 11 Nov 2026 | Regulation (EU) 2026/1770 |
| Removability requirement applies | 18 Feb 2027 | Article 96(2)(a) |
| Temporary exception for electric toys ends | 31 Jul 2030 | Regulation (EU) 2026/1770, para 2(d) |
Who is responsible, the manufacturer or the supplier?
The manufacturer is responsible. If you produce in Asia and put your own brand on the product, you are legally the manufacturer and you must ensure the battery can come out. The importer checks that this is correct. A product that does not meet the requirement remains your responsibility, even if the factory supplied the design.
In practice the factory often supplies a design in which the battery is glued or soldered in place. That is cheaper and faster. For the home market that may be allowed, for the European market it is not from 2027, unless your product falls under an exception.
You must be able to show what your choice rests on. If you rely on an exception, record which one and why. An inspector does not ask whether the battery can come out, but why it possibly does not have to.
What to arrange now
Start with an inventory of your products with a built-in portable battery. Determine per product whether the removability requirement applies or whether an exception is in play. Adjust the design where needed and record the reasoning, so you can show it during an inspection.
- Map out which products have a built-in portable battery, with the type, weight and function of the battery.
- Determine per product whether it falls under Article 11. A product that is itself the battery, such as a power bank, falls outside it.
- Test whether an exception under paragraph 2 or paragraph 3 applies to your product. Also check whether the safety condition is met.
- Adjust the design where the requirement applies, so the battery can be replaced with ordinary tools. Add the instructions for removal and replacement.
- Record the choice and the reasoning in your technical documentation, so you can show during an inspection what it rests on.
- Regulation (EU) 2023/1542 concerning batteries and waste batteries, Article 11 (removal and replacement of portable batteries) and Article 96 (application), text on EUR-Lex
- Delegated Regulation (EU) 2026/1770 amending Article 11(2) of Regulation (EU) 2023/1542 (expansion of the exceptions, in force since 11 November 2026), text on EUR-Lex
- European Commission, guidance on appliances for use in a wet environment (Notice C/2025/214), environment.ec.europa.eu
Lawyer with a background in e-commerce. Writes about the rules he applies every day in files for brands and manufacturers. More about Francois
Frequently asked questions
Does the battery in a power bank have to be removable?
From when must a battery be removable?
Can I glue the battery in if my product has to be waterproof?
Rather not sort it out yourself?
We determine per product whether the removability requirement applies and put the file together for brands and manufacturers. A fixed price upfront, a proposal within 24 hours.
See the CE route