Machinery Regulation 2023/1230: what changes in 2027?

Regulations
Short answer

The Machinery Regulation (EU) 2023/1230 replaces Machinery Directive 2006/42/EC and applies to machines placed on the market from 20 January 2027. New requirements cover cybersecurity, software updates and AI-based safety functions, and it sets out more clearly when a modification makes you the manufacturer. Until 20 January 2027, Machinery Directive 2006/42/EC remains leading for placing machines on the market.

A regulation, not a directive

In everyday use almost everyone talks about the new machinery directive, but 2023/1230 is a regulation. That difference matters: a directive first had to be transposed into each member state’s own law, leaving room for interpretation. A regulation applies directly and identically in every member state.

The reason for the overhaul is that machinery has long stopped being only steel, buttons and motors. Machines are connected, contain software, receive updates and can partly operate on their own. That brings risks the 2006 directive did not know.

In addition, the legislator wanted to set out more clearly who is responsible when a machine is modified or rebuilt and then placed on the market again. There was a lot of grey area there. That area is now smaller.

Cybersecurity and software

Where the old directive mainly looked at mechanical and electrical hazards, the regulation explicitly names the risks of digital technology. It covers protection against tampering, unwanted interference with safety functions and risks that arise because a machine is connected.

That changes what a CE marking tells you. If you do not know how the manufacturer handles software, updates and security, that marking says less than you think. For machines with remote functions or a companion app, you want to ask those questions in advance and record the answers.

Artificial intelligence in safety functions

The regulation takes account of machines in which artificial intelligence plays a role in a safety function. That does not mean such technology is banned. The bar does rise once the behaviour of a safety function can change or becomes less predictable. A heavier assessment route can then apply.

In practice: if your machine has a function that adapts itself and that touches safety, assume the conformity assessment will be more complex than you are used to.

When a modification makes you the manufacturer

Anyone who modifies a machine so that its safety materially changes can be regarded as the manufacturer. You then have to meet the requirements again for the modified part. Sometimes that applies to the machine as a whole. The regulation makes the concept of substantial modification clearer than the directive did.

This affects everyone who refurbishes, retrofits, rebuilds or has machines adapted under their own name. A change you see as maintenance can legally produce a new machine with your name on it.

The list of high-risk machinery changes too

The regulation modernises the categories for which a heavier assessment route applies, where a notified body is more often required. If your range falls under it, that directly determines what your supplier has to be able to demonstrate.

Digital instructions

Under the regulation, instructions may more often be provided digitally, provided you set this up to be accessible and findable. In certain situations a paper version must still be supplied or be available on request. So it is not a licence to simply leave a file somewhere.

The question that counts is procedural: can you demonstrate, per product, that the correct instructions in the correct version were available to the user. That calls for version control, not a download page.

Not sure whether your machine falls under this?

Tell us briefly what kind of machine it is. We will get in touch with what we can do and what it costs.


    If it concerns a product, briefly mention what it is and what it does.


    This is where we send the answer.


    Only fill this in if you prefer to be called.

    When the Machinery Regulation starts to apply

    The regulation was adopted on 14 June 2023 and published in the Official Journal of the European Union on 29 June 2023. For placing machines on the market it applies on a mandatory basis from 20 January 2027. Until that date, Machinery Directive 2006/42/EC remains leading, even though the new text is already fixed.

    A corrigendum was later issued to the original text, correcting a clerical error in the application dates. For the main rule this changes nothing about 20 January 2027, but it is a reason to always consult the consolidated version on EUR-Lex rather than the first publication.

    That may seem far off. If you have many article numbers, several suppliers or sales through online marketplaces, it is not. Cleaning up documentation, making supplier arrangements and getting product data in order almost always takes more time than expected. Machines lawfully placed on the market before 20 January 2027 under the old directive do not have to comply with the regulation retroactively.

    What to arrange now

    Start with the scope and with your suppliers. Determine which products will fall under the regulation and ask, per machine, how the manufacturer handles software and security. Record who supplies which documentation. That work is needed regardless of the exact application date.

    Do not wait for a complete explanation. The European Commission’s official application guide for 2023/1230 is not finished yet. The Commission expects it to be fully ready only in the course of 2027 and, until then, makes available only approved separate sections. The harmonised standards under the regulation have not all been published either. The date of 20 January 2027 therefore arrives sooner than the full guidance. You have to steer on your own scope and on your suppliers now.

    1. Determine which products come into scope. Not only complete machines, but also certain safety components and sometimes software that affects safe operation.
    2. For connected machines, find out how updates and security are arranged. Record the answers.
    3. Map which modifications you make yourself. Then test whether they count as substantial.
    4. Check that your instructions are available in the correct version for each variant.
    5. Check whether your range falls under the changed high-risk categories.
    Sources
    • Regulation (EU) 2023/1230 on machinery, of 14 June 2023, consolidated text on EUR-Lex
    • Directive 2006/42/EC on machinery, which is repealed by the regulation, text on EUR-Lex
    • European Commission, overview and guidance on the Machinery Regulation, including the corrigendum on the application dates and the application guide under development, Machinery page
    European Commission guidance and the regulation details checked on 12 November 2026
    Francois Frietman
    Founder of Declaer

    Lawyer with a background in e-commerce. Writes about the rules he applies every day in files for brands and manufacturers. More about Francois

    Frequently asked questions

    I sell machines through my webshop. What changes?
    Your online information and documentation have to be correct, complete and under version control. If a question comes from a market surveillance authority, a customer or an online marketplace, you want to be able to show straight away which conformity information and instructions belong to exactly that variant.
    I import machines from outside the EU. What is my biggest risk?
    That the manufacturer claims CE but cannot supply supporting evidence that holds up. Or that the documentation does not match the European requirements: the wrong language, incomplete instructions, a missing risk assessment or an unclear responsible party. For connected machines this weighs more heavily.
    Will I only be allowed to supply digital instructions?
    Digital instructions are becoming more normal, but you have to set this up carefully. Think of accessibility, findability and being able to supply a paper version where that is required or on request. See it as a process question, not as leaving a file somewhere.
    I rebuild machines for customers. Do I fall under the regulation?
    You may. If your modification counts as substantial, you can be regarded as the manufacturer for the modified part and take on the related obligations. This is an important point for anyone doing engineering, integration or refurbishment.
    Which products fall under it?
    Not only complete machines. Certain safety components and, in some cases, software relevant to safe operation can also come into scope. If you sell machines with apps, controls or safety functions, have the scope determined early.
    What happens to machines already on the market?
    The regulation applies to placing on the market from 20 January 2027. Machines lawfully placed on the market before then under the old directive do not have to comply retroactively. If you modify such a machine substantially, that changes.
    Is there already an official guide to the Machinery Regulation?
    Not fully yet. The European Commission is working on an application guide for 2023/1230 and expects it to be completely ready only in the course of 2027. Until then there are only approved separate sections. The harmonised standards have not all been published either. Waiting for the complete explanation is therefore not an option if you want to meet the application date.
    Signing up did not work. Please try again.
    Almost done. Check your inbox and confirm your subscription.

    Compliance update

    Every month, what changes in product legislation

    In plain language, with the date it takes effect, so you are up to date right away.

    One email a month. Compliance updates only, that is a promise.

    Placing machines on the market

    We determine which requirements apply to your machine, carry out the risk assessment and build the technical file you sign the declaration with. Fixed price agreed in advance.

    See the CE route