Importing jewellery into the EU: which rules apply?

Per productgroup
Short answer

Importing jewellery and selling it under your own name in the EU makes you the legal manufacturer. You must then show that the piece meets the REACH limits for nickel, cadmium and lead and that it is safe under the GPSR. Real precious metal also needs a hallmark from an assay office. The nickel test measures release to the skin, while the cadmium and lead tests measure the content in the metal.

Which rules apply when importing jewellery?

Anyone who imports jewellery and sells it under their own brand in the EU is legally the manufacturer. The piece falls under the GPSR for product safety and under REACH for chemical substances. Nickel, cadmium and lead carry hard limits. Real precious metal needs a hallmark, and children’s jewellery can fall under the toy rules.

Jewellery has no dedicated product directive with a CE marking, the way a machine or a toy does. The basis is the General Product Safety Regulation, Regulation (EU) 2023/988, which has applied since 13 December 2024. It requires every consumer product to be safe and for you to be able to substantiate that. On top of that come the substance rules of REACH.

The practical question is therefore not which single law applies, but which requirement attaches to which part of your piece. A gold-plated earring touches different rules than a silver ring or a pendant of cast zinc alloy.

Part or materialRuleWhat you must show
Every piece of jewelleryGPSR (EU) 2023/988A safe product, marking and the details of the responsible party
Metal in skin contactREACH, nickel releaseRelease below the limit, measured to EN 1811
Zinc alloy and solderREACH, cadmium and leadContent below the legal limit
Plastic beads and coatingREACH, phthalatesSubstance content below the limit
Gold, silver, platinumHallmarking Act 2019A hallmark for precious metal above the weight threshold

Am I the manufacturer if I have jewellery made under my brand?

Yes. Put your own brand on a piece made in Asia and you are the manufacturer in the EU, not the workshop that casts or sets it. You then carry the full responsibility: the piece must be safe, you keep a technical file and your name and address belong with the product.

The GPSR places the heaviest duties on the manufacturer. If you buy a piece ready-made and resell it under the maker’s brand, you are the importer and your duties are lighter. Put your own brand on it or have it made to your design, and you move legally into the manufacturer role. With private label that is the rule, not the exception.

As the manufacturer you keep a technical file: a description of the piece, a risk assessment and the test reports per material. Jewellery gets no CE marking, but the file exists all the same. On or with the product go your name and your postal address, so a market surveillance authority can see who is responsible.

Not sure whether your jewellery complies?

Tell us briefly what you import. We will get in touch with what we can do and what it costs.


    If it concerns a product, briefly mention what it is and what it does.


    This is where we send the answer.


    Only fill this in if you prefer to be called.

    Which substances does REACH restrict in jewellery?

    REACH restricts in Annex XVII three metals that pose a risk in jewellery: nickel for allergy, cadmium and lead for their toxicity. Nickel carries a limit on release to the skin, cadmium and lead a limit on the content in the metal. Plastic beads and coatings also touch the phthalates.

    The limits in Annex XVII are hard thresholds: if a substance sits above them, the piece may not go on the market. Each substance has its own entry in the annex, with its own limit value and its own test method. A laboratory checks the piece per part and per metal.

    SubstanceEntryLimit valueTest
    Nickel270.5 µg/cm² per week (0.2 for piercings)EN 1811
    Cadmium230.01 percent (100 mg/kg) in metalContent test
    Lead630.05 percent (500 mg/kg) in partContent test
    Phthalates51 and 52Restricted in plastic partsContent test

    Alongside these limits there is a duty to inform. If a substance of very high concern from the SVHC list sits above 0.1 percent by weight in a part, you need not remove it, but you must inform your customer and notify the substance in the SCIP database of the European Chemicals Agency.

    How much nickel may a piece of jewellery release?

    A piece of jewellery in prolonged contact with the skin may release at most 0.5 microgram of nickel per square centimetre per week. For items that go into a pierced body part, such as ear studs and piercings, the limit is 0.2 microgram. The limit is about release, not about how much nickel is inside.

    The nickel restriction sits in entry 27 of Annex XVII to REACH and goes back to the old Nickel Directive. Nickel is the most common cause of contact allergy. A ring or earring rests against the skin for a long time. That is why the test measures release over a week, not the total content.

    The release test is called EN 1811. Jewellery with a coating is first aged artificially to EN 12472, which simulates wear and corrosion, before the release is measured. That way the nickel that comes free once the plating starts to wear after a year also counts.

    The broad import guides name only the risk, not the limit

    English-language guides on jewellery link nickel to stainless steel and cadmium to zinc alloy, but leave out the limit values and the test standards. Anyone relying on them knows which metal poses a risk, but not what the laboratory must measure against.

    Do imported pieces of jewellery need a hallmark?

    Jewellery of gold, silver, platinum or palladium must carry a hallmark in the Netherlands above a weight threshold, under the Hallmarking Act 2019. An independent assay office checks the content and strikes the mark. Fashion or imitation jewellery without precious metal does not, but it does fall under the REACH limits.

    The Hallmarking Act separates precious metal from the rest. For genuine gold, silver, platinum or palladium above the exemption threshold, assaying is mandatory: an assay office such as WaarborgHolland or Edelmetaal Waarborg Nederland checks the content and strikes a hallmark. Light items below the weight threshold are exempt. The exact threshold per metal is set in the act.

    If you sell fashion jewellery, the hallmark plays no role, but all attention shifts to REACH. It is precisely the cheap plating, the zinc alloy and the solder where nickel, cadmium and lead turn up. A piece therefore need not be precious metal to require a test file.

    What applies to children’s and toy jewellery?

    A piece of jewellery intended as a toy for children under fourteen falls under the Toy Safety Regulation, not only under REACH. That applies to toy jewellery and to children’s jewellery sold alongside toys. The chemical requirements are stricter there. The maker also goes through a safety assessment.

    The line is drawn by the intended use. A glitter ring in a toy shop, a set of plastic bracelets in a party bag or a necklace with a dress-up costume is a toy. Then the Toy Safety Regulation, Regulation (EU) 2025/2509, applies, which replaces the old directive from 2009.

    For adult fashion it stays with REACH and the GPSR. If you are unsure whether your children’s piece counts as a toy, have that assessed beforehand. The difference decides which tests and which file you need. A wrong call only comes to light at an inspection.

    Which file do I need as an importer of jewellery?

    As an importer of jewellery you keep a file with a description of each model, the test reports per material and a substantiation that the piece is safe. The test reports show the nickel release to EN 1811 and the cadmium and lead content. Ask your supplier for those reports before you order.

    The responsibility lies with you, not with the workshop in Asia. A market surveillance authority such as the NVWA and your business customers hold you to account, not your supplier. A test report in the name of an earlier client does not cover your product: it must concern your model and your batch.

    Ask for a report from an accredited laboratory per purchase, aimed at the piece you sell. A gold-plated earring calls for the nickel test with prior ageing, a pendant of zinc alloy for the cadmium and lead determination. Whoever arranges that beforehand stands stronger at an inspection than whoever has to look for the report afterwards.

    Sources
    • Regulation (EU) 2023/988 on general product safety (GPSR), text on EUR-Lex
    • Regulation (EC) 1907/2006 (REACH), Annex XVII, entries 23, 27 and 63, text on EUR-Lex
    • Regulation (EU) 494/2011 amending Annex XVII as regards cadmium, text on EUR-Lex
    • Regulation (EU) 836/2012 amending Annex XVII as regards lead, text on EUR-Lex
    • Regulation (EU) 2025/2509 on the safety of toys, text on EUR-Lex
    • Hallmarking Act (Waarborgwet), text on wetten.overheid.nl, plus the guidance from WaarborgHolland
    • Standards EN 1811 (nickel release) and EN 12472 (wear and corrosion simulation for coated items)
    Legislation checked on 3 November 2026
    Francois Frietman
    Founder, Declaer

    Lawyer with a background in e-commerce. Writes about the rules he applies every day in files for brands and manufacturers. More about Francois

    Frequently asked questions

    Does a piece of jewellery need a CE marking?
    No. Jewellery gets no CE marking. That applies to product groups with their own directive, such as toys or machinery. A piece of jewellery falls under the GPSR and under REACH. These require no CE mark, but a safe product, a substantiated file and the correct marking.
    How much nickel may an earring release?
    An earring in prolonged contact with the skin may release at most 0.5 microgram of nickel per square centimetre per week. For an ear stud going through a fresh hole the limit is 0.2 microgram. The release is measured to EN 1811, for coated items after ageing to EN 12472.
    Do I need to have my fashion jewellery hallmarked?
    No. Hallmarking applies only to items of gold, silver, platinum or palladium above the weight threshold in the Hallmarking Act. Fashion or imitation jewellery without precious metal needs no hallmark. It must, however, meet the REACH limits for nickel, cadmium and lead.
    Signing up did not work. Please try again.
    Almost done. Check your inbox and confirm your subscription.

    Compliance update

    Every month, what changes in product legislation

    In plain language, with the date it takes effect, so you are up to date right away.

    One email a month. Compliance updates only, that is a promise.

    Rather not work it out yourself?

    For brands and importers we map out which rules apply to their jewellery and arrange the tests and the file. You get a proposal within 24 hours, with a fixed price up front.

    See general product safety