Packaging sorting label: what goes on it and when?

Regulations
Short answer

A harmonised packaging sorting label becomes mandatory across the EU under the PPWR. The pictogram shows the material and the waste stream so consumers can sort it correctly. Because the implementing act with the design has not yet been adopted, the obligation applies after 12 August 2028, expected in 2029. The regulation only names 12 August 2028 as the earliest date if the implementing act had entered into force i

What is the harmonised sorting label?

The sorting label is a harmonised pictogram that will appear on almost all packaging placed on the EU market. It shows consumers what material the packaging is made of and which waste stream it belongs in. Article 12 of the PPWR sets out this obligation for the whole Union.

The PPWR replaces the 1994 Packaging Directive with a single set of rules that applies directly in every Member State. Until now each country chose its own system. France has the Triman with the Info-tri, other countries use the plastic number codes from an old EU decision. In everyday language such a mark is called a recycling logo or recycling symbol, but the PPWR deliberately calls it a sorting label, because it is about correct separation. A broader explanation of the regulation is in our overview of the PPWR obligations.

The obligation affects everyone who places packaging on the market: the manufacturer of the product, the importer and in many cases the seller under its own brand. If you place a product with your own packaging on the European market, you are the one who puts the label on the box. Your name is on it, so your label has to be right.

When does the packaging sorting label apply?

The obligation applies after 12 August 2028, with certainty. The PPWR names that date as the earliest moment, but it only held if an implementing act had entered into force by 12 August 2026. That did not happen, so the other branch applies: 24 months after the implementing act. Because it is still missing, the date is expected in 2029.

Article 12 instructs the Commission to set out, by implementing act, how the material composition is indicated on the label. That first act was due by 12 August 2026. It did not arrive. The 12 August 2028 date only held with an act on time, so the obligation now inevitably falls later: 24 months after the act enters into force. According to the latest reports the Commission is now aiming for the end of 2026, which works out to an obligation in 2029.

A separate, later deadline applies to substances of concern. By 1 January 2030 the Commission must set a method to mark those substances digitally. That marking must show at least the name and the concentration of the substance of concern per material. It is separate from the sorting pictogram and therefore comes later.

WhatDateBasis
First implementing act, indication of material compositiondue by 12 Aug 2026, delayedArticle 12
Sorting label mandatory on packaging24 months after the implementing act (after 12 Aug 2028)Article 12
Digital marking of substances of concernby 1 Jan 2030Article 12

Packaging sorting label: what must it show?

The label must be pictogram-based and understandable without explanation, including for people with disabilities. It shows the material composition of the packaging and the matching waste stream. The exact design is not fixed yet: the Commission sets it in the implementing act that is still to come.

Do not confuse this sorting label with the recycling logo or recycling icon already on much packaging, such as the loop of arrows or the number code in a triangle. Those are older or voluntary marks. The PPWR pictogram is a new, mandatory label.

The Commission’s Joint Research Centre has drawn up prototype pictograms and tested them with consumers and Member States. Until the implementing act that makes a design binding is in place, any design you come across is a preview, not a final specification. Do not print anything yet.

Once the harmonised label applies, Member States may no longer require their own national sorting labelling on top of it. Until then the national systems run side by side. If you already sell in France, you still put the Triman with the sorting instruction on your packaging.

What marking is already required on your packaging?

The sorting label is not here yet, but other packaging requirements already apply. Since 12 August 2026 your packaging must carry a unique identification with the manufacturer’s details, stay within the limit values for substances and be covered by a declaration of conformity with documentation. The sorting pictogram is separate from this.

In addition, the national rules that the harmonised label has not yet replaced still apply. The best-known example is France’s Triman with the Info-tri, mandatory on packaging that reaches French consumers. If you sell in several countries, you are now dealing with different systems at once.

Environmental claims also come together on the packaging. What you may say about recyclability or recycled content is in our article on sustainability claims on packaging. This article covers only the mandatory sorting label, one of the requirements that has not yet taken effect.

Why you should not change your printing from Asia yet

Because the design of the sorting label is not fixed and the implementing act is delayed, it does not pay to adapt your packaging to it now. If you change your printing too early, you risk a second print run as soon as the Commission adopts the final pictogram. Hold off on this part.

Many brands have their packaging printed in Asia. A change to the printing means a new printing plate, a new proof and a longer lead time. You do not swap a plate for a symbol that can still change. It is cheaper to print once, at the moment the requirements are fixed.

What you can lock in now will not change: the unique identification with your manufacturer details, the choice of material within the limit values and, for France, the Triman. Reserve space in the design for the sorting label, so that later you only have to drop it in without redesigning the whole box.

Delay is not cancellation

The implementing act is slipping, but the obligation itself is in the regulation. Count on a date after 12 August 2028, expected in 2029. Keep an eye on the publication of the implementing act. Once it is there, your deadline is fixed 24 months later and you can have your printing done right in one go.

Not sure which label your packaging needs now?

Let us know briefly what packaging it concerns. We will get in touch with what we can do and what it costs.


    If it concerns a product, briefly mention what it is and what it does.


    This is where we send the answer.


    Only fill this in if you prefer to be called.

    What to do now

    Start with the requirements that already apply: the unique identification, the limit values for substances and the declaration of conformity. Keep to the national labels wherever you sell. Reserve space in your packaging design for the sorting label and wait for the final printing until the Commission sets the pictogram.

    The approach comes down to five steps:

    1. Map your packaging by material type and record which requirements already apply.
    2. Put the unique identification with your manufacturer details on the packaging or in an accompanying document for stock already printed.
    3. Check the national labelling rules in every country where you sell, starting with the Triman for France.
    4. Reserve a fixed spot in the design for the sorting label, so you can drop it in later without a redesign.
    5. Follow the publication of the implementing act under Article 12 and plan your printing for the moment the pictogram is fixed.
    Sources
    • Regulation (EU) 2025/40 (PPWR) on packaging and packaging waste, Article 12 on the labelling of packaging, text on EUR-Lex
    • Regulation (EU) 2025/40, Article 71 (applies from 12 August 2026), text on EUR-Lex
    • European Commission, Packaging and packaging waste, environment.ec.europa.eu
    Legislation and guidance checked on 22 October 2026
    Francois Frietman
    Founder of Declaer

    Lawyer with a background in e-commerce. Writes about the rules he applies daily in files for brands and manufacturers. More about Francois or connect on LinkedIn.

    Frequently asked questions

    When is the packaging sorting label mandatory?
    After 12 August 2028, with certainty. That date from the regulation only held with an implementing act in force by 12 August 2026. It did not arrive. The obligation therefore falls 24 months after the implementing act, expected in 2029.
    What must the sorting label show?
    A pictogram that is understandable without explanation and indicates the material composition of the packaging plus the waste stream. The Commission sets the exact design in an implementing act that is still to come. Until it exists, any design is a preview.
    Do I have to change my packaging for the sorting label now?
    No. The design is not fixed and the obligation has not taken effect. Reserve space in your packaging design and have the final printing done once the Commission sets the pictogram, so you do not have to print twice.
    Does the sorting label replace France’s Triman?
    Eventually yes. Once the harmonised label applies, Member States may no longer require their own national sorting labelling on top of it. Until then the Triman with the Info-tri remains mandatory on packaging that reaches French consumers.
    Signing up did not work. Please try again.
    Almost done. Check your inbox and confirm your subscription.

    Compliance update

    Every month, what changes in product legislation

    In plain language, with the date it takes effect, so you are up to date right away.

    One email a month. Compliance updates only, that is a promise.

    Get your packaging PPWR-proof?

    We map your packaging by material type, record which requirements already apply and track what comes when. A proposal with a fixed price within 24 hours.

    See our PPWR service